Diy teleprompter11/8/2022 ![]() ![]() Step 5 Position mirror glass into box at a 45 degree upward angle. You can put a bit of duct tape across the hole on both sizes and then cut a cross and it will make a really good holder for your camera lens and reduces light coming from the back end. This is usually the same as the filter you put on your lens. You can find the width of your camera lens by it's lens size (i.e. On the back of the box, find the center and cut a circle out just large enough for your camera lens. Step 4 Position box on it's longer side, with the opening facing forward. Ideally, you can let the window tint guy just apply it to your glass. With patience you can do it, just use plenty of water, a squeegee, and give it a day to dry. ![]() Don't waste your time or money buying the tint at home depot or online, you get way too much and it cost about six times as much. Although this is ideal, the one I got looked way too mirrored but it worked great! This cost me $5. Step 2 Go to a local window tint or car tinting company and ask for a bout a 14" (inches) x 3' (ft) section of mirrored window tint 15% reflectiveness/visibility. The glass at home depot is used as replacement glass for picture frames and small projects, so look for glass around 3/32" to 1/8" thick. The length and height of your glass should be the same as the length of your box so that it can be slid in nicely at a 45 degree angle. You can get a smaller piece or larger piece depending on how big you want your screen to be and/or what size of a box you have handy. Step 1 Purchase a glass square at home depot for ~$4 for a 12" x 16" piece. If you have an ipad, iphone, or computer monitor, you can make a $10 teleprompter that rivals that of the pros! You don't need woodcrafting skills or an elaborate design, just a box knife and about 20 minutes of your time. ![]()
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |